Масло моторное синтетика ENVIRO+ HYBRID 0W-16 (FULL SYN.) 5 л

Характеристики

Значения приводятся так, как их указал производитель.

Фасовки и артикулы

Область применения

• ENVIRO+ HYBRID 0W-16
• is designed for use in
• modern
• 4, 6 & 8+ cylinder, multi-cam, multi-valve (including VVT), naturally aspirated,
• supercharged
• & turbocharged, low emission petrol engines, including petrol/electric Hybrid.
• is designed for vehicles that run on low viscosity engine oils and is optimised for use in
• PETROL-ELECTRIC
• hybrid vehicles that specify this
• viscosity grade
• or SAE 0W-20 engine oils. It can be used where API SP Resource Conserving, SN Plus and ILSAC
• GF-6B
• is specified and where previous specifications SN (2010–2020),
• SM
• (2004-2010) are required as well as where fuel economy specification ILSAC
• GF-5
• is recommended.
• meets API SP Resource Conserving specification providing improved turbocharger deposit control,
• oxidation
• , aeration, fuel economy, fuel economy retention, timing
• chain
• and idle stop
• wear
• protection and enhanced low
• speed
• pre-ignition
• (LSPI) protection.
• can be used where fuel economy oils are specified such as in Toyota Prius, Honda Civic and Lexus ES3000h. It can be used in vehicles manufacturer by:
• Honda
• Lexus
• Mitsubishi
• Nissan
• Toyota
• Vehicles and
• Fuel Type
• ENVIRO+ HYBRlD 0W-16
• is suitable for use in passenger cars, 4WDs & light commercial vehicles and can be used with petrol/gasoline including
• E10
• . It is NOT for use in vehicles not specifically designed to run on low viscosity engine oils. It cannot be used in
• diesel
• engined vehicles or in motorcycles.
• NOTE:
• when
• changing oil
• , Penrite recommend using
• Penrite Engine Flush
• , a fast acting,
• solvent
• free, engine cleaning formulation that removes engine deposits,
• sludge
• and contaminants with the oil service drain. It contains added
• zinc
• for engine wear protection and its fast acting formulation works in 10 minutes.
• Please Note:
• A 58mm cap with pouring
• tap
• is available to fit 7, 10 & 20 litre packs.
• https://penriteoil.com.au/products/58mm-plastic-tap
• * Low and
• mid SAPS
• oils may sometimes be referred to as
• "Low Ash"
• oils
• What is Low or Mid SAPs engine oil?
• Does Penrite produce oils suitable for vehicles fitted with a DPF?
• Are Enviro+ oils only used for diesel cars with DPFs?
• Why is Enviro+ 5W-30 more expensive than the other Enviro+ products?
• Why are there 5 x 5W-30 Enviro+ engine oils in your range?
• I want to use one of your oils but it is not recommended on your Product Selector for my vehicle. How do I find out if it is suitable?
• What is the difference between ACEA C1, C2, C3, C4 & C5?
• What is the difference between mineral, semi-synthetic (SEMI SYN.) and full synthetic (FULL SYN.) base oils?
• Why is Enviro+ EU 5W-30 cheaper to purchase than Enviro+ 5W-30?
• Can Enviro+ EU 5W-30 be used in a diesel vehicle fitted with a DPF?
• Can Penrite Enviro Plus C4 5W-30 be used where ACEA C3 is required?
• Why does Enviro+ EU 5W-30 have an API SN specification and Enviro+ 5W-30 does not considering they can do many of the same manufacturer specifications?
• Does Penrite have an engine oil that meets GM Dexos™ 1 Gen 2?
• What is the difference between Enviro+ 5W-30 and Enviro + C3? They are both 5W30 and bo
• Does Penrite have a product suitable for GM Dexos™ 2 applications?
• API licensed
• and tested for quality guarantee assurance.
• API SP Resource Conserving
• oil specification
• MAXIMUM
• protection,
• MINIMUM
• formation and
• REDUCED
• piston deposits
• ENHANCED
• LSPI
• (Low
• Speed
• Pre-Ignition
• ) protection
• IMPROVED
• engine durability, better fuel economy, increased wear protection.
• turbo charger deposits
• BETTER
• wear protection for “Idle Stop” engines
• , deposit control and aeration
• fuel economy and fuel economy retention
• LONGER
• Engine oil drain intervals
• CATALYST
• and Oxygen sensor friendly
• ETHANOL
• fuel
• compatible
• – Safe with
• E85
• OPTIMISED
• for
• HYBRID
• Petrol/
• Electric vehicles
• MAXIMISES
• fuel economy**
• engine
• life
• ***
• Blended using premium
• SYNTHETIC
• base oils
• for heat resistance and high performance
• **Combined fuel economy improvement of >2% compared to reference oil in the sequence VID test
• *** Demonstrated in Sequence IV test result of 17% of maximum allowable wear